MSRP 22,95 €

Package price (1 m²): 18,90 €

Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Forbo Allura Material 40 Adhesive Vinyl - Charcoal Concrete (624518DR4_con)

0.40 mm wear layer - 41 industry (light) - solid vinyl - without bevel - concrete look - tile format - grey - Made in Europe - hard-wearing - suitable for damp rooms - non-slip

Item no.: 624518DR4_con

Authentic appearance.
Glass fleece backing ensures high dimensional stability.
Reduced weight and easy installation.
Economical solution for fully bonded installation with high durability.
Robust 0.4 mm wear layer and PUR surface protection for easy maintenance.
Suitable for almost all living areas.
Versatile designs for herringbone and large-area installation as well as mix-and-match concepts.
100% free from harmful plasticisers.
Produced in Europe with 100% renewable energy.
Can be combined with WW underfloor heating systems.

Processing variants:
In the BATH/WC: 3586207
For floating/self-adhesive installation, use the planeo Silent Stick: 10020218PW!

Authentic appearance.
Glass fleece backing ensures high dimensional stability.
Reduced weight and easy installation.
Economical solution for fully bonded installation with high durability.
Robust 0.4 mm wear layer and PUR surface protection for easy maintenance.
Suitable for almost all living areas.
Versatile designs for herringbone and large-area installation as well as mix-and-match concepts.
100% free from harmful plasticisers.
Produced in Europe with 100% renewable energy.
Can be combined with WW underfloor heating systems.

Processing variants:
In the BATH/WC: 3586207
For floating/self-adhesive installation, use the planeo Silent Stick: 10020218PW!

Offer request

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

forbo

Forbo Flooring Systems provides quality flooring throughout the world. Linoleum, carpet tiles and vinyl flooring are all part of the product range. One of the pillars of the Forbo Group is Forbo Flooring Systems. Please visit the Forbo Group website for more information on the Group structure, the Board of Directors and key figures.

From 1928 to the present day and beyond: growth from success to success. The entrepreneurial experience has made Forbo what it is today. The company's global activity brings it closer to markets and customers. Dialogue with them enables Forbo to think ahead and anticipate strategic opportunities before they are there. Forbo is a company that is constantly evolving.

item no.: 624518DR4_con

authentic
hard-wearing
non-slip
suitable for WW underfloor heating
phthalate-free - no harmful plasticisers
easy to clean
Made in Europe

Technical data

item no.	624518DR4_con
Manufacturer	forbo
Collection	Allura
Collection variant	Material 40
Thickness in mm	2
Wear layer	0,40 mm
Wear class	41 Industrial (light)
Joint	No bevel
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Tile format
Installation type	glue
Sorting (grain)	calm/elegant
Look	Concrete effect
Special features	Suitable for humid rooms, Non-slip, Waterproof, Seamless
Structure	Full vinyl
Piece per package	15
Style	Modern
Slip resistance	R10
Shipping group	M
Range of application	Residential, Commercial, Industrial
Underfloor heating	Hydronic UFH compatible
Package Content	1 m²

Print page

DIY step by step

Variant: DIY instruction wet bed bonding & Silent Stick

button

1. substrate preparation

The substrate should be permanently dry, load-bearing and even. Any unevenness should be sanded down and filled with a floor levelling compound. The surface to be laid can then be cleaned with a hoover.

CAUTION: Never install Silent Stick over a soft subfloor, e.g. carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for at least 24 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in every package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

Silent Stick (alternative to adhesive):

button

3. before laying

Now you can lay out the sheets in the opposite direction to the direction in which the top layer is laid. The foil side should always face upwards. Simply cut the Silent Stick to size with a cutter knife.

button

4. laying instructions

As soon as the strips have been laid butt to butt, the foil is removed area by area (approx. 2 planks wide) and the vinyl planks can be glued on and pressed down.

ATTENTION: There must always be a gap of approx. 5mm between the flooring and the wall and between the flooring and all fixed components.

button

5. finish

Afterwards, the laid surface is rolled with a roller and the skirtings can be fixed. Please note the drying times of the adhesive. If you have a large area, we recommend that you roll the laid planks after approx. 20-30 minutes so that no air bubbles form.

Classic wet-bed gluing:

button

3. before laying

Before applying the adhesive, open the packages and lay the elements from different packages in alternation to obtain an even decorative pattern in the area. Mark the reference points using a chalk line and cut the vinyl planks to size with a cutter knife. The planks can now be broken by simply folding them.

button

4. installation instructions

Apply the adhesive with a notched trowel and lay the vinyl planks in the wet bed, observing the flash-off times of the adhesive. The elements should be placed in the adhesive with little tension and with tight joints and pressed on. When doing so, observe the laying direction on the back of the vinyl planks.

ATTENTION: A gap of approx. 10mm must always be maintained between the flooring and the wall as well as to all fixed components.

button

5. finish

The laid surface is then rolled with a roller and the skirting boards can be fixed. Please note the drying time of the adhesive. The glued surface should be rolled after approx. 20-30 minutes so that no air bubbles form.

Forbo Allura Material 40 Adhesive Vinyl - Charcoal Concrete (624518DR4_con)

We recommend the following accessories

Product description

Technical data

DIY step by step

Helpful Videos

Gluing vinyl flooring - installation instructions for vinyl sheets

Gluing vinyl flooring to old flooring in large rooms - planeo silent stick

Glue vinyl flooring XXL on self-adhesive impact sound insulation

Redesign guest WC - stick vinyl flooring to walls

Laying vinyl tiles on self-adhesive insulation in the WC

Waterproofing bathroom - laying vinyl on walls and floor

Grouting vinyl tiles

Subfloor testing before installing flooring

Gluing vinyl flooring to steel stairs with concrete steps

Fill floor for gluing vinyl flooring

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?

Replace damaged vinyl planks on self-adhesive impact sound insulation planeo Silent stick