Package price (3,82 m²): 103,52 €

Price 1 m²: 27,10 €

FREE

SAMPLE

VAT included plus. 49,95 € shipping costs for deliveries to DE

M

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Gerflor adhesive vinyl - Virtuo 55 Glue Down HB Blomma cream | Authentic appearance (39201463)

0.55 mm wear layer - 42 industry (normal) - full vinyl - micro bevel - wood look - herringbone - cream - 100% recyclable - easy to clean - non-slip

Item no.: 39201463

Herringbone design.
With textured embossed surface.
Improved adhesion to the substrate.
Easy to clean and easy to maintain.
Authentic design thanks to realistic surface.
Is 100% recyclable.

Processing variants:
In the bathroom/toilet: 3586207
For floating installation, use the planeo Silent Stick: 10020218PW!

Offer request

Description

Technical data

DIY - Videos

Product description

Herringbone design.
With textured embossed surface.
Improved adhesion to the substrate.
Easy to clean and easy to maintain.
Authentic design thanks to realistic surface.
Is 100% recyclable.

Processing variants:
In the bathroom/toilet: 3586207
For floating installation, use the planeo Silent Stick: 10020218PW!

The Virtuo 55 HB adhesive vinyl has an authentic herringbone design with a tactile surface and slightly bevelled edges.

Environmentally friendly and recyclable:
The adhesive vinyl is 100% recyclable and already contains up to 35% recycled material, which conserves resources and makes it a sustainable choice for your home.

Natural feel & natural look
Virtuo 55 Glue Down has an embossed surface that can be felt. The vinyl floor is also sealed with PUR+ MATT, which gives it its authentic design.

Improved adhesion
The underside of the adhesive vinyl is embossed for better adhesion to the subfloor.

Particularly easy to clean
Thanks to the PUR+ coating, regular cleaning and maintenance is simplified. Daily damp mopping is sufficient to remove loose dirt and dust

.

Elastic comfort core
The vinyl floor is extremely barefoot-friendly and creates a high level of walking comfort thanks to the elastic centre layer.

Gerflor

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

item no.: 39201463

ultra realistic
herringbone look
non-slip
100% recyclable
easy to clean

Technical data

item no.	39201463
Manufacturer	Gerflor
Collection	Virtuo 55 Glue Down
Collection variant	HB
Length in mm	762
Width in mm	152
Thickness in mm	2.5
Wear layer	0,55 mm
Wear class	42 Industrial (moderate)
Joint	Micro bevel
suitable for	Bedroom & living room, Hallway & Corridor
installation pattern	Herringbone
Installation type	glue
Look	Wood effect
Sorting (grain)	calm/elegant
Underfloor heating	suitable
Special features	Environmentally friendly, Suitable for humid rooms, Non-slip, Waterproof
EAN	3475710608032
Piece per package	33
Structure	Full vinyl
Slip resistance	R10
Shipping group	M
Weight	14,71 kg / Packing
Colour	cream
Style	Vintage
Range of application	Residential, Commercial, Industrial
Doorstop	door left
Hinge	2-teilig (Standard)
Package Content	3,82 m²

Print page

DIY step by step

Variant: DIY instruction wet bed bonding & Silent Stick

button

1. substrate preparation

The substrate should be permanently dry, load-bearing and even. Any unevenness should be sanded down and filled with a floor levelling compound. The surface to be laid can then be cleaned with a hoover.

CAUTION: Never install Silent Stick over a soft subfloor, e.g. carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for at least 24 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in every package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

Silent Stick (alternative to adhesive):

button

3. before laying

Now you can lay out the sheets in the opposite direction to the direction in which the top layer is laid. The foil side should always face upwards. Simply cut the Silent Stick to size with a cutter knife.

button

4. laying instructions

As soon as the strips have been laid butt to butt, the foil is removed area by area (approx. 2 planks wide) and the vinyl planks can be glued on and pressed down.

ATTENTION: There must always be a gap of approx. 5mm between the flooring and the wall and between the flooring and all fixed components.

button

5. finish

Afterwards, the laid surface is rolled with a roller and the skirtings can be fixed. Please note the drying times of the adhesive. If you have a large area, we recommend that you roll the laid planks after approx. 20-30 minutes so that no air bubbles form.

Classic wet-bed gluing:

button

3. before laying

Before applying the adhesive, open the packages and lay the elements from different packages in alternation to obtain an even decorative pattern in the area. Mark the reference points using a chalk line and cut the vinyl planks to size with a cutter knife. The planks can now be broken by simply folding them.

button

4. installation instructions

Apply the adhesive with a notched trowel and lay the vinyl planks in the wet bed, observing the flash-off times of the adhesive. The elements should be placed in the adhesive with little tension and with tight joints and pressed on. When doing so, observe the laying direction on the back of the vinyl planks.

ATTENTION: A gap of approx. 10mm must always be maintained between the flooring and the wall as well as to all fixed components.

button

5. finish

The laid surface is then rolled with a roller and the skirting boards can be fixed. Please note the drying time of the adhesive. The glued surface should be rolled after approx. 20-30 minutes so that no air bubbles form.

Gerflor adhesive vinyl - Virtuo 55 Glue Down HB Blomma cream | Authentic appearance (39201463)

Product description

Technical data

DIY step by step

Helpful Videos

Gluing vinyl flooring - installation instructions for vinyl sheets

Gluing vinyl flooring to old flooring in large rooms - planeo silent stick

Glue vinyl flooring XXL on self-adhesive impact sound insulation

Redesign guest WC - stick vinyl flooring to walls

Laying vinyl tiles on self-adhesive insulation in the WC

Waterproofing bathroom - laying vinyl on walls and floor

Grouting vinyl tiles

Subfloor testing before installing flooring

Gluing vinyl flooring to steel stairs with concrete steps

Fill floor for gluing vinyl flooring

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?

Replace damaged vinyl planks on self-adhesive impact sound insulation planeo Silent stick