Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Wineo adhesive Vinyl - 400 wood XL Ambition Oak Calm (DB00122)

0,30 mm Wear layer - 31 Commercial (light) - Full vinyl - Micro bevel - Wood effect - Plank pattern - grey

Item no.: DB00122

Durable with low product thickness.
Has a high elasticity.
Ideally suited for renovations.
Ideal for use in damp rooms.
Particularly durable and functional.
100% free of harmful plasticisers.

The most frequently asked questions about adhesive vinyl!

Request alternative

Description

Technical data

DIY - Videos

Product description

Durable with low product thickness.
Has a high elasticity.
Ideally suited for renovations.
Ideal for use in damp rooms.
Particularly durable and functional.
100% free of harmful plasticisers.

The most frequently asked questions about adhesive vinyl!

The vinyl floors for gluing in the wineo 400 collection impress with their high functionality and durability.

Healthy to live with - phthalate-free
Renovation-friendly
Can be combined with silent stick

planeo silent stick impact sound insulation

can be used as an alternative to adhesive during installation. To do this, the silent stick is laid on the subfloor before installation. With this procedure, you can also remove the vinyl floor later without leaving any residue. When laying the adhesive vinyl, please ensure that the subfloor is level, dry and dust-free.

wineo

As a brand of the internationally active company Windmöller, wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo partly feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.

item no.: DB00122

hard-wearing
resistant to stains
easy to clean
good room acoustics
synchronous embossing

Technical data

item no.	DB00122
Manufacturer	Wineo
Collection	400
Collection variant	wood XL
Length in mm	1505
Width in mm	235
Thickness in mm	2
Wear layer	0,30 mm
Wear class	31 Commercial (light)
Joint	Beveled edge (4 sides)
Warranty	15 Jahre Privat
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	glue
Wood type	Oak
Look	Wood effect
Sorting (grain)	natural/classic
Underfloor heating	Hydronic UFH compatible
Special features	Synchronous embossing
EAN	4017268464259
Piece per package	12
Structure	Full vinyl
Slip resistance	R9
Shipping group	M
Weight	14,84 kg / Packing
Colour	grey
Style	Modern
Range of application	Residential, Commercial
Package Content	4,24 m²

Downloads

Print page

DIY step by step

Variant: DIY instruction wet bed bonding & Silent Stick

button

1. substrate preparation

The substrate should be permanently dry, load-bearing and even. Any unevenness should be sanded down and filled with a floor levelling compound. The surface to be laid can then be cleaned with a hoover.

CAUTION: Never install Silent Stick over a soft subfloor, e.g. carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for at least 24 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in every package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

Silent Stick (alternative to adhesive):

button

3. before laying

Now you can lay out the sheets in the opposite direction to the direction in which the top layer is laid. The foil side should always face upwards. Simply cut the Silent Stick to size with a cutter knife.

button

4. laying instructions

As soon as the strips have been laid butt to butt, the foil is removed area by area (approx. 2 planks wide) and the vinyl planks can be glued on and pressed down.

ATTENTION: There must always be a gap of approx. 5mm between the flooring and the wall and between the flooring and all fixed components.

button

5. finish

Afterwards, the laid surface is rolled with a roller and the skirtings can be fixed. Please note the drying times of the adhesive. If you have a large area, we recommend that you roll the laid planks after approx. 20-30 minutes so that no air bubbles form.

Classic wet-bed gluing:

button

3. before laying

Before applying the adhesive, open the packages and lay the elements from different packages in alternation to obtain an even decorative pattern in the area. Mark the reference points using a chalk line and cut the vinyl planks to size with a cutter knife. The planks can now be broken by simply folding them.

button

4. installation instructions

Apply the adhesive with a notched trowel and lay the vinyl planks in the wet bed, observing the flash-off times of the adhesive. The elements should be placed in the adhesive with little tension and with tight joints and pressed on. When doing so, observe the laying direction on the back of the vinyl planks.

ATTENTION: A gap of approx. 10mm must always be maintained between the flooring and the wall as well as to all fixed components.

button

5. finish

The laid surface is then rolled with a roller and the skirting boards can be fixed. Please note the drying time of the adhesive. The glued surface should be rolled after approx. 20-30 minutes so that no air bubbles form.

Wineo adhesive Vinyl - 400 wood XL Ambition Oak Calm (DB00122)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Gluing vinyl flooring - installation instructions for vinyl sheets

Gluing vinyl flooring to old flooring in large rooms - planeo silent stick

Glue vinyl flooring XXL on self-adhesive impact sound insulation

Redesign guest WC - stick vinyl flooring to walls

Laying vinyl tiles on self-adhesive insulation in the WC

Waterproofing bathroom - laying vinyl on walls and floor

Grouting vinyl tiles

Subfloor testing before installing flooring

Gluing vinyl flooring to steel stairs with concrete steps

Fill floor for gluing vinyl flooring

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?

Replace damaged vinyl planks on self-adhesive impact sound insulation planeo Silent stick