Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Vinlay Rapid HD Roll 6,5m²

Removable and floating impact sound underlay

Item no.: 1881941HDR

Floating vinyl sheets / adhesive vinyl.
Adhesive vinyl can be removed without leaving any residue.
Quick installation without time-consuming subfloor preparation.

Request alternative

Description

Technical data

DIY - Videos

Product description

Floating vinyl sheets / adhesive vinyl.
Adhesive vinyl can be removed without leaving any residue.
Quick installation without time-consuming subfloor preparation.

The alternative to glue!

The Vinlay Rapid HD roll enables floating installation on existing subfloors as well as dry bonding of the planks on the highly adhesive surface of the underlay. Minor unevenness in the subfloor is evened out without time-consuming preparations. Thanks to its quick installation, the impact sound-reducing mat is an ideal alternative to adhesive among the design floor coverings.

Material: PUM (polyurethane + minerals)
Thickness: 1,8mm
Roll size: 6.5 x 1m / 6.5m² per roll
Weight: 2,43 kg/m² |16 kg/roll
Impact sound reduction: up to 17 dB
Thermal resistance: up to 0.01 (m² K) / W
Smaller unevennesses are evened out
suitable for installation on all conventional hot water underfloor heating systems

item no.: 1881941HDR

Easy handling
clean laying
Immediately walkable
Underfloor heating

Technical data

item no.	1881941HDR
Weight	11.9200 kg / Packing
EAN	4033805025073
Piece per package	1
suitable for	Vinyl floor
Length in mm	6500
Width in mm	1000
Thickness in mm	1.8
Shipping group	S
Package Content	1 Roll

Downloads

Print page

DIY step by step

Variant: DIY instructions

button

1. Preparation & placing of the rolls

Observe the official laying instructions provided in every package before laying the rolls, otherwise any warranty or guarantee claim will be invalid.

The subsurface should be firm, level, dry, and dust-free before laying. Before placing, thoroughly vacuum the subfloor. Store the insulating mat in the room for about 24 hours before installing it to allow the material to adapt. As soon as the substrate has been checked, the first sheet can be laid out in a well-positioned spot in the opposite direction of the top floor covering. Simply cut the first mesh from the roll using a cutting knife to separate it from the roll. When installing parquet, the rough side is laid down. When placing vinyl, the rough side should be up. A cutting knife can easily separate the mesh. To avoid overlap, the succeeding lanes are now placed end to end on the ones already in place.

ATTENTION: Please note that the edge distances of about 5 mm from the wall should be maintained.

button

2. Fix panels

To prevent the footfall sound insulation strips from slipping while paving the floor, secure them at the abutting edges using aluminium tape. Check that the strips do not overlap. There should be places of contact only at the abutting edges. You can now begin to install the floor.

Vinlay Rapid HD Roll 6,5m²

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Gluing vinyl flooring - Installation instructions for vinyl sheets

Substrate preparation for vinyl floor adhesion

Gluing Wineo Purline

planeo silent stick - the alternative to gluing

Replacing damaged vinyl planks on self-adhesive impact sound insulation planeo silent stick

Fill uneven tiles and joints