Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Gerflor click Vinyl - Senso Clic Premium Kola (60300309)

0,55 mm Wear layer - 33 Commercial (heavy) - Full vinyl - Beveled edge (4 sides) - Wood effect - Plank pattern - grey

Item no.: 60300309

With Gerflor's exclusive Clic system.
Can be laid directly on tiles.
Suitable for damp rooms.
Planks can be replaced as required.

Request alternative

Description

Technical data

DIY - Videos

Product description

With Gerflor's exclusive Clic system.
Can be laid directly on tiles.
Suitable for damp rooms.
Planks can be replaced as required.

Senso Clic Premium from Gerflor has an extremely stable vertical clic system and is therefore highly resilient. In addition, the vinyl planks are perfectly sealed and therefore also 100% waterproof.

Easy to cut and simple to install
Perfect for kitchen and bathroom
Easy to clean and durable

The Senso Clic Premium vinyl plank is easy to clean and maintain. Thanks to the PUR+ connection, it is also insensitive to impacts and wear.

Gerflor

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

item no.: 60300309

easy to clean
highly resilient
resistant
100% recyclable

Technical data

item no.	60300309
Manufacturer	Gerflor
Collection	Senso Clic Premium
Length in mm	1239
Width in mm	214
Thickness in mm	4.5
Wear layer	0,55 mm
Wear class	33 Commercial (heavy)
Joint	Beveled edge (4 sides)
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Look	Wood effect
Sorting (grain)	lively/rustic
Underfloor heating	suitable
Special features	Suitable for humid rooms, Waterproof
EAN	3475710459290
Piece per package	8
Structure	Full vinyl
Slip resistance	R9
Shipping group	M
Weight	15,71 kg / Packing
Colour	grey
Style	Modern
Range of application	Residential, Commercial
Click variant	DropDown
Package Content	2,12 m²

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Gerflor click Vinyl - Senso Clic Premium Kola (60300309)

Product description

Technical data

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?