MSRP 103,98 €

Package price (2,74 m²): 87,41 €

Price 1 m²: 31,90 €

incl. 19% VAT. plus. 49,95 € shipping costs for deliveries to DE

M

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

SKAVA rigid click vinyl - Unique Barnas | integrated impact sound insulation (LO-2186)

0,55 mm Wear layer - 33 Commercial (heavy) - Rigid SPC + insulation - V-groove (4 sides) - Click system - Wood effect - Plank pattern - brown - Synchronized embossing - waterproof - XL plank floor

Item no.: LO-2186

Rigid SPC - mineral-based, highly compacted core board.
Transparent surface sealing with
UV-hardened final coating.
High-quality synchronised embossing ensures tangible authenticity.
Integral impact sound underlay - 1 mm.
Levelling of height differences - ideal for new buildings.
Can be laid over large areas without expansion joints.
Low swelling and shrinkage behaviour.
Optimum heat distribution with WW underfloor heating.
Suitable for private and commercial use.

Offer

Description

Technical data

DIY - Videos

Product description

Rigid SPC - mineral-based, highly compacted core board.
Transparent surface sealing with
UV-hardened final coating.
High-quality synchronised embossing ensures tangible authenticity.
Integral impact sound underlay - 1 mm.
Levelling of height differences - ideal for new buildings.
Can be laid over large areas without expansion joints.
Low swelling and shrinkage behaviour.
Optimum heat distribution with WW underfloor heating.
Suitable for private and commercial use.

Discover our high-quality rigid click vinyl from SKAVA flooring, which offers a perfect balance between beauty and functionality. SKAVA flooring has been carefully designed to enhance your living spaces while offering practical benefits.

High durability:

Durability

Easy to clean and hygienic

Versatility:

Order today and experience the benefits of planeo Rigid Klick Vinyl!

SKAVA flooring

Nachhaltigkeit und erstklassiger Service

SKAVA flooring - Wood&Vinyl legt großen Wert auf nachhaltige Produktionsprozesse und Materialien, die den hohen Qualitätsansprüchen und ökologischen Standards gerecht werden. Das engagierte Team steht mit umfassendem Service und Beratung zur Seite, um die beste Lösung für individuelle Bedürfnisse zu finden.

SKAVA flooring - Wood&Vinyl bietet die perfekte Kombination aus Design, Funktionalität und Nachhaltigkeit. Vertrauen auf einen deutschen Hersteller, der höchste Ansprüche an Qualität und Kundenzufriedenheit stellt, zahlt sich aus.

item no.: LO-2186

hard-wearing
for private and commercial use
suitable for WW underfloor heating
waterproof
suitable for damp rooms
decor-synchronised embossing
all-round V4 joint
integrated footfall sound insulation

Technical data

item no.	LO-2186
Colour	brown
Piece per package	10
Special features	Integrated impact sound, Suitable for humid rooms, Waterproof, Synchronous embossing, XL Size
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Sorting (grain)	lively/rustic
Wood type	Oak
Underfloor heating	suitable
Structure	Rigid SPC + insulation
Joint	V-groove (4 sides)
Look	Wood effect
Length in mm	1524
Width in mm	180
Wear layer	0,55 mm
Collection	Unique
Shipping group	M
Manufacturer	SKAVA flooring
Thickness in mm	5.5

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

SKAVA rigid click vinyl - Unique Barnas | integrated impact sound insulation (LO-2186)

Product description

Technical data

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?