MSRP 71,76 €

Package price (2,40 m²): 47,76 €

Price 1 m²: 19,90 €

FREE

SAMPLE

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

STILARO Rigid click vinyl 2.0 - Hail Oak - Made In Germany

0.30 mm wear layer - 31 trades (light) - Rigid SPC - Suitable for damp rooms - Non-slip R10 - Micro bevel - Wood look wideplank oak brown

Item no.: F100P502

Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Large areas can be laid without expansion joints.
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.

Offer request

Description

Technical data

DIY - Videos

Product description

Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Large areas can be laid without expansion joints.
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.

Rigid Vinyl is a new development of classic vinyl flooring for many applications. The ultra-modern Rigid Board improves several properties of vinyl flooring.

SPC carrier board (Stone-Powder-Composite)
Temperature resistant
Robust

Stilaro

Stilaro stands for quality "Made in Germany". Their high-quality vinyl flooring is robust, waterproof, and particularly durable. Thanks to the innovative Rigid SPC technology, they offer ultra-strong flooring solutions, ideal for kitchens and bathrooms. Additionally, they are highly recyclable, contributing to a sustainable environment. Trust Stilaro for stylish and functional flooring.

item no.: F100P502

MADE IN GERMANY
Rigid SPC - ultra-strong
100% waterproof
ideal for kitchen & bathroom
recyclable

Technical data

item no.	F100P502
Structure	Rigid SPC
Installation type	click
installation pattern	Plank pattern (1-plank)
Wood type	Oak
Sorting (grain)	natural/classic
Joint	Micro bevel
Underfloor heating	suitable
Slip resistance	R10
Wear class	31 Commercial (light)
Wear layer	0,30 mm
Weight	19.8000 kg / Packing
Manufacturer	Stilaro
Colour	brown
EAN	4062212199572
Piece per package	10
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
Look	Wood effect
Special features	Suitable for humid rooms, Non-slip
Range of application	Residential, Commercial
Length in mm	1200
Width in mm	200
Thickness in mm	4
Shipping group	M
Click variant	UniClic
Package Content	2,40 m²

Print page

DIY step by step

Variant: DIY Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness that exceeds 3 mm over a length of 1 m should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. installation instructions

Tips for the UniClic system: To achieve as uniform a floor appearance as possible, it is recommended to install panels from different packages mixed together. You should start laying in a corner (left) and starting from the wall. With the tongue side facing the wall, lay the first board. Angle the end of the second board into the first. In the second row, the plank is placed at an angle to the end face of the row already laid and folded down. As the board is folded down, the long side of the board will click into the existing board at an angle. With a little pressure, the click joints now snap into place. The transverse joints (front side) should be offset by at least 30 cm from row to row ("wild bond", half a plank length for tile formats). You can use a tapping block and a light tap on the long side of the plank to help it along. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a multi-purpose knife/cutter and break it off.

button

5. finishing the last row

Place the spacers on walls, door frames, fixed wall cabinets, kitchen units, etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

STILARO Rigid click vinyl 2.0 - Hail Oak - Made In Germany

Product description

Technical data

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?