Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Wineo click Vinyl - 800 wood XL Mud Rustic Oak (DLC00063)

0,55 mm Wear layer - 33 Commercial (heavy) - Full vinyl - Micro bevel - Wood effect - Plank pattern - brown

Item no.: DLC00063

High durability and long service life.
Stain-resistant and easy to clean.
With tactile surface embossing.
Without harmful softeners.

Request alternative

Description

Technical data

DIY - Videos

Product description

High durability and long service life.
Stain-resistant and easy to clean.
With tactile surface embossing.
Without harmful softeners.

The wineo 800 series offers you almost limitless variety. The special thing is to combine the different lines in the collection with each other. The products in the collection are perfectly matched to each other, so that your new floor becomes a unique composition.

and renovation-friendly
Suitable for damp rooms and underfloor heating

wineo 800 design floors can be easily installed in damp rooms as well as on underfloor heating systems. The floors from the wineo 800 collection invite you to be creative in your interior design. They guarantee an impressive effect in your rooms and convince with strength in terms of use and care.

wineo

As a brand of the internationally active company Windmöller, wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.

item no.: DLC00063

resistant
non-slip
joint-friendly
easy to clean
synchronous embossing

Technical data

item no.	DLC00063
Manufacturer	Wineo
Collection	800
Collection variant	wood XL
Length in mm	1505
Width in mm	237
Thickness in mm	5
Wear layer	0,55 mm
Wear class	33 Commercial (heavy)
Joint	Beveled edge (2 sides)
Warranty	20 Jahre Privat
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Sorting (grain)	lively/rustic
Underfloor heating	suitable
Special features	Pet Friendly, Suitable for humid rooms, Waterproof, Synchronous embossing
EAN	4017268216629
Piece per package	6
Structure	Full vinyl
Slip resistance	R9
Shipping group	L
Weight	21,63 kg / Packing
Colour	brown
Style	Vintage
Range of application	Residential, Commercial, Industrial
Click variant	DropDown
Package Content	2,14 m²

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Wineo click Vinyl - 800 wood XL Mud Rustic Oak (DLC00063)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?