Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

HARO TRITTY 100 - Silent CT Décor Gran Via 4V Oak Veneto crema auth./matt

Name: HARO TRITTY 100 - Silent CT Décor Gran Via 4V Oak Veneto crema auth./matt
Brand: HARO
SKU: 535863
Availability: InStock

32 Commercial (moderate) - Beveled edge (4 sides) - Wood effect - Plank pattern

Item no.: 535863

Impact sound-reducing adhesive strips are attached on the back. Additional impact sound insulation is not required.

Request alternative

Description

Technical data

DIY - Videos

Product description

Impact sound-reducing adhesive strips are attached on the back. Additional impact sound insulation is not required.

HARO

With the high-quality floor coverings from HARO, Germany's leading manufacturer of parquet floors, you quickly feel at home. Thus it is no surprise, of all things, that the company's slogan is "At home at last.". Because HARO floors conjure up a homely atmosphere in your rooms that inspires. The owner-managed family business from Bavaria was founded in 1866 as a wood processing company. The subsidiary Hamberger Flooring GmbH is responsible for all HARO activities in the laminate, parquet and cork flooring sector. Customers in over 90 countries worldwide trust the impeccable quality of exquisite HARO brand floor coverings.

item no.: 535863

Technical data

item no.	535863
Manufacturer	Haro
Collection	Tritty 100
Collection variant	Gran Via 4V Silent CT
Length in mm	2200
Width in mm	243
Thickness in mm	10
Wear class	32 Commercial (moderate)
Joint	Beveled edge (4 sides)
suitable for	Bedroom & living room
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Underfloor heating	suitable
EAN	4018427407933
Piece per package	4
Slip resistance	R9
Shipping group	L
Weight	15,21 kg / Packing
Range of application	Residential
Click variant	DropDown
Package Content	2,14 m²

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate test

The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.

CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.

button

2. acclimatisation

The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.

button

3. subfloor preparation

Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.

Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!

button

4. laying instructions

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.

ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.

button

5. last row

If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.

button

6. finish

Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.

HARO TRITTY 100 - Silent CT Décor Gran Via 4V Oak Veneto crema auth./matt

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Buying laminate: What do I need to know?

Laying vinyl flooring, laminate or parquet on old carpeting - is that possible?

Laminate format variants - what decor options do I have?

Laying laminate in tile look

Cheap laminate

Checking the subfloor before laying flooring