Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

MEISTER Laminate flooring - MeisterDesign LL 250 S Light Chateau Oak 6841

32 Commercial (moderate) - Micro bevel - Wood effect - Plank pattern

Item no.: 6275006841

For private and commercial use.
For installation on hot water underfloor heating.
Also suitable for bathrooms.
More stable due to multi-layer product structure.
Integrated impact sound underlay ensures good room acoustics.

Request alternative

Description

Technical data

DIY - Videos

Product description

For private and commercial use.
For installation on hot water underfloor heating.
Also suitable for bathrooms.
More stable due to multi-layer product structure.
Integrated impact sound underlay ensures good room acoustics.

MeisterDesign Laminate LL 250 S has a particularly high and stable product structure and, with use class 23|32, is also suitable for commercial areas with normal wear and tear.

Suitable for installation in damp rooms
Integrated impact sound insulation
Antibacterial surface property

The antibacterial surface property of the LL 250 S creates a healthy indoor climate. The effectiveness of the antibacterial property is classified as "strong".

The LL 250 S collection from Meister has been awarded the Blue Angel. This means that the floor coverings are low in emissions and pollutants and are harmless to the health of the living environment.

MEISTER

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.

item no.: 6275006841

DiamondPro surface
AquaSafe+edge impregnation
Underfloor heating
Integrated impact sound
Antistatic

Technical data

item no.	6275006841
Manufacturer	MEISTER
Collection	MeisterDesign
Collection variant	LL 250 S
Length in mm	2052
Width in mm	248
Thickness in mm	12
Wear class	32 Commercial (moderate)
Joint	Micro bevel
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Underfloor heating	suitable
Special features	Integrated impact sound, Damp-proof laminate, Blue Angel
EAN	4011138388645
Piece per package	4
Click system	FoldDown
Shipping group	S
Weight	23,48 kg / Packing
Range of application	Residential, Commercial
Click variant	DropDown
Package Content	2,04 m²

Downloads

Meister Laminate flooring - Warranty conditions EN

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate test

The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.

CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.

button

2. acclimatisation

The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.

button

3. subfloor preparation

Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.

Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!

button

4. laying instructions

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.

ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.

button

5. last row

If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.

button

6. finish

Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.

MEISTER Laminate flooring - MeisterDesign LL 250 S Light Chateau Oak 6841

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Buying laminate: What do I need to know?

Laying vinyl flooring, laminate or parquet on old carpeting - is that possible?

Laminate format variants - what decor options do I have?

Laying laminate in tile look

Cheap laminate

Checking the subfloor before laying flooring