Package price (2,71 m²): 51,22 €

Price 1 m²: 18,90 €

incl. 19% VAT. plus. 79,95 € shipping costs for deliveries to DE

L

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

MEISTER Laminate - MeisterDesign LL 150 rock oak sand 07122 | synchronised embossing (600007-2052220-07122)

32 trades (normal) - joint (4-sided) - click system 5G - wood look - wideplank - beige - suitable for damp rooms - environmentally friendly

Item no.: 600007-2052220-07122

More stable due to multi-layer product structure.
Antibacterial Diamant Pro surface with synchronised embossing.
Antistatic decor paper.
HDF centre layer.
AquaStop edge impregnation.
Suitable for damp rooms.
For private and commercial use.
100 % natural raw materials.

Offer request

Description

Technical data

DIY - Videos

Product description

More stable due to multi-layer product structure.
Antibacterial Diamant Pro surface with synchronised embossing.
Antistatic decor paper.
HDF centre layer.
AquaStop edge impregnation.
Suitable for damp rooms.
For private and commercial use.
100 % natural raw materials.

Meister Laminate Flooring MeisterDesign LL 150 impresses with its good quality and high functionality. The country house planks are both easy to clean and robust. The all-round V-joint also creates a natural and elegant look.

uncomplicated & resilient
Scratch-resistant surface
Suitable for installation in damp rooms
Antibacterial surface properties
Convenient & easy to clean

Put your trust in the proven quality of the MeisterDesign flooring range

MEISTER

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.

item no.: 600007-2052220-07122

antistatic & antibacterial surface
suitable for damp rooms
Hot water and electric underfloor heating
Blue Angel

Technical data

item no.	600007-2052220-07122
Installation type	click
installation pattern	Plank pattern (1-plank)
Wood type	Oak
Joint	V-groove (4 sides)
Underfloor heating	suitable
Wear class	32 Commercial (moderate)
Click system	5G
Weight	20.5000 kg / Packing
Manufacturer	MEISTER
Colour	beige
EAN	4064611175201
Piece per package	6
Collection	MeisterDesign
Collection variant	LL 150
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
Look	Wood effect
Special features	Damp-proof laminate, Blue Angel, Synchronous embossing
Range of application	Residential, Commercial
Length in mm	2052
Width in mm	220
Thickness in mm	8
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
Shipping group	L
Click variant	DropDown
Package Content	2,71 m²

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate test

The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.

CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.

button

2. acclimatisation

The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.

button

3. subfloor preparation

Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.

Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!

button

4. laying instructions

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.

ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.

button

5. last row

If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.

button

6. finish

Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.

MEISTER Laminate - MeisterDesign LL 150 rock oak sand 07122 | synchronised embossing (600007-2052220-07122)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Buying laminate: What do I need to know?

Laying vinyl flooring, laminate or parquet on old carpeting - is that possible?

Laminate format variants - what decor options do I have?

Laying laminate in tile look

Cheap laminate

Checking the subfloor before laying flooring