Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Gerflor loose-laying Vinyl - Senso Premium Easy Cordoba Champagne (36181033)

Name: Gerflor loose-laying Vinyl - Senso Premium Easy Cordoba Champagne (36181033)
Brand: Gerflor
SKU: 36181033
Availability: InStock

0,55 mm Wear layer - 42 Industrial (moderate) - Full vinyl - Micro bevel - Tile effect - Tile format - beige

Item no.: 36181033

Request alternative

Description

Technical data

DIY - Videos

Product description

Senso Premium Easy from Gerflor has an anti-slip underside. In addition, the vinyl planks are super sealed and can therefore also be used in damp rooms.

Easy to cut and simple to install
Perfect for kitchen and bathroom
Easy to clean and durable

The Senso Premium Easy vinyl plank is easy to clean and maintain. It is also resistant to knocks and wear and tear.

Gerflor

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

item no.: 36181033

easy to clean
highly resilient
resistant
100% recyclable

Technical data

item no.	36181033
Manufacturer	Gerflor
Structure	Full vinyl
Length in mm	610
Width in mm	610
Thickness in mm	4
Colour	beige
Look	Tile effect
Piece per package	4
Collection	Senso Premium Easy
Installation type	loose-laying
installation pattern	Tile format
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
Joint	Micro bevel
Special features	Suitable for humid rooms, Waterproof, Multicoloured
Style	Vintage
Slip resistance	R9
Wear class	42 Industrial (moderate)
Wear layer	0,55 mm
EAN	3475710438264
Shipping group	M
Weight	10,73 kg / Packing
Range of application	Residential, Commercial, Industrial
Package Content	1,49 m²

Print page

DIY step by step

button

1. substrate preparation

The substrate should be permanently dry, load-bearing, level and firmly bonded. Clean the surface to be installed with a hoover.

CAUTION: Never install vinyl over laminate or a soft subfloor e.g. carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for 24-72 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. before laying

The next step is to stick on the tape strips. Please always follow the installation instructions here as well, as this step can vary depending on the manufacturer. The edge areas are taped off to fix the vinyl planks. The strips can now be rolled on so that any air bubbles that have formed can be released and the planks get a firm hold.

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

button

4. laying instructions

Once the tapes are firmly stuck down, you can remove the foil from the tape strip for the first row. Now you can start laying in one corner (left) and starting from the wall. Hold the right side of the vinyl plank slightly higher than the left side and tape the plank to the tape, following the arrows. For the next planks, make sure that they are laid butt to butt with the planks already in place and that the ends are flush. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a cutter knife. Before cutting, remove the protective film from the back of the plank.

Attention: A distance of approx. 1 cm must always be maintained between the flooring and the wall as well as to all fixed components.

Gerflor loose-laying Vinyl - Senso Premium Easy Cordoba Champagne (36181033)

Product description

Technical data

DIY step by step

Helpful Videos

Laying vinyl flooring loose - Loose Lay Vinyl

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Laying floor on heating pipe

Checking the subfloor before laying flooring

Shortening door frames

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?