MSRP 93,77 €

Package price (1,67 m²): 64,96 €

Price 1 m²: 38,90 €

FREE

SAMPLE

VAT included plus. 79,95 € shipping costs for deliveries to DE

L

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Project Floors loose-laying Vinyl - LOOSE-LAY/55 PW 3020/L5 (PW3020L5)

0,55 mm Wear layer - 42 Industrial (moderate) - Full vinyl - Beveled edge (4 sides) - Wood effect - Plank pattern - grey

Item no.: PW3020L5

Very renovation-friendly & easy installation.
Does not require extensive clicking or gluing.
Suitable for almost all living areas.

Offer request

Description

Technical data

DIY - Videos

Product description

Very renovation-friendly & easy installation.
Does not require extensive clicking or gluing.
Suitable for almost all living areas.

The vinyl floors from the Loose Lay collection by Project Floors are hard-wearing and quick to install:

renovation friendly & easy to install
hygienic & easy to clean
special design
free of harmful substances

the product does not contain any harmful softeners

PROJECT FLOORS

The name PROJECT FLOORS has been associated with high-quality LVT floor coverings since 1999. The abbreviation "LVT" stands for luxury vinyl tiles and indicates that these are PVC-based floorings. The PVC designs from PROJECT FLOORS are available in ceramic concrete, sand or plain colour finishes that replicate the look of natural materials. They combine the authentic look of the original materials with the robustness and ease of care of synthetic floor coverings.

item no.: PW3020L5

Easy to install
low installation height
easy to clean
authentic design
free of harmful substances

Technical data

item no.	PW3020L5
Manufacturer	Project Floors
Collection	LOOSE-LAY/55
Length in mm	914
Width in mm	183
Thickness in mm	4.2
Wear layer	0,55 mm
Wear class	42 Industrial (moderate)
Joint	Beveled edge (4 sides)
Warranty	15 Jahre Privat, 5 Jahre Gewerbe
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	loose-laying
Look	Wood effect
Sorting (grain)	natural/classic
Underfloor heating	suitable
Special features	Suitable for humid rooms, Waterproof
EAN	4250664350133
Piece per package	10
Structure	Full vinyl
Shipping group	L
Weight	11,69 kg / Packing
Colour	grey
Style	Vintage
Range of application	Commercial, Industrial
Package Content	1,67 m²

Downloads

Print page

DIY step by step

button

1. substrate preparation

The substrate should be permanently dry, load-bearing, level and firmly bonded. Clean the surface to be installed with a hoover.

CAUTION: Never install vinyl over laminate or a soft subfloor e.g. carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for 24-72 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. before laying

The next step is to stick on the tape strips. Please always follow the installation instructions here as well, as this step can vary depending on the manufacturer. The edge areas are taped off to fix the vinyl planks. The strips can now be rolled on so that any air bubbles that have formed can be released and the planks get a firm hold.

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

button

4. laying instructions

Once the tapes are firmly stuck down, you can remove the foil from the tape strip for the first row. Now you can start laying in one corner (left) and starting from the wall. Hold the right side of the vinyl plank slightly higher than the left side and tape the plank to the tape, following the arrows. For the next planks, make sure that they are laid butt to butt with the planks already in place and that the ends are flush. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a cutter knife. Before cutting, remove the protective film from the back of the plank.

Attention: A distance of approx. 1 cm must always be maintained between the flooring and the wall as well as to all fixed components.

Project Floors loose-laying Vinyl - LOOSE-LAY/55 PW 3020/L5 (PW3020L5)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Laying vinyl flooring loose - Loose Lay Vinyl

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Laying floor on heating pipe

Checking the subfloor before laying flooring

Shortening door frames

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?