planeo Priming Paint WP 5l - white

• Creates an even base.
• Lightly filling.
• For inside & outside.
• Free from solvents and harmful plasticisers.
• Covers uneven substrates such as putty spots.

Properties:

• consolidating effect & good penetration depth
• serves as first coat without texture
• long open time for streak-free painting
• subsequent coats adhere better
• covers uneven substrates e.g. filler spots, for flawless wallpapering work
• Solvent-free and free of harmful emissions

Substrate:
Must be clean, grease-free, dry and load-bearing. For sanding, chalking and absorbent substrates (e.g. machine (e.g. machine gypsum plaster, light plasters, etc.) we recommend the use of planeo Tiefgrund. In principle, the primer to be used should be determined for suitability by trial application. For substrate preparation and application, the VOB, Part C, DIN 18363 and the corresponding BFS data sheets must be observed.

Area of application:
Exterior and interior, on new and old plaster surfaces, on slightly absorbent and non-absorbent mineral mineral substrates, e.g. cement plaster, lime-cement plaster, concrete and plasterboard (without lignin bleeding). bleeding). As a primer for subsequent coatings based on emulsion, silicone resin and silicate (without silicification). silicate base (without silicification) or for wallpapering. Check gypsum plaster for suitability. For sanding, chalking and absorbent substrates (e.g. machine gypsum plaster, light plasters, etc.) we recommend the use of we recommend the use of planeo Tiefgrund.