MSRP 149,00 €

Package price (2,88 m²): 97,63 €

Price 1 m²: 33,90 €

FREE

SAMPLE

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

SKAVA Parquet - Oak Malmö | natural oiled (GT-NG-MAL_conf)

3.0 mm wear layer - 3-layer - click system drop-down - wood look - wideplank - brown

Item no.: GT-NG-MAL_conf

High-quality European oak: robust and durable.
Sustainably sourced wood.
Distinctive grain for an authentic look.
Less wear and tear compared to laminate or vinyl flooring.

Special grading with its own character.
Each plank of the parquet has a unique appearance due to strong colour differences and wood structure.
Installation is particularly easy without gluing and thanks to the drop-down click system.

Each package can contain up to 2 half-lengths.

Offer request

Description

Technical data

DIY - Videos

Product description

High-quality European oak: robust and durable.
Sustainably sourced wood.
Distinctive grain for an authentic look.
Less wear and tear compared to laminate or vinyl flooring.

Special grading with its own character.
Each plank of the parquet has a unique appearance due to strong colour differences and wood structure.
Installation is particularly easy without gluing and thanks to the drop-down click system.

Each package can contain up to 2 half-lengths.

The natural parquet flooring from SKAVA with its natural oiled surface creates a special feeling of warmth and cosiness:

Special grading with its own character
Easy to lay
Made from European woods

Each package can contain up to 2 half-lengths.

SKAVA flooring

Nachhaltigkeit und erstklassiger Service

SKAVA flooring - Wood&Vinyl legt großen Wert auf nachhaltige Produktionsprozesse und Materialien, die den hohen Qualitätsansprüchen und ökologischen Standards gerecht werden. Das engagierte Team steht mit umfassendem Service und Beratung zur Seite, um die beste Lösung für individuelle Bedürfnisse zu finden.

SKAVA flooring - Wood&Vinyl bietet die perfekte Kombination aus Design, Funktionalität und Nachhaltigkeit. Vertrauen auf einen deutschen Hersteller, der höchste Ansprüche an Qualität und Kundenzufriedenheit stellt, zahlt sich aus.

item no.: GT-NG-MAL_conf

Technical data

item no.	GT-NG-MAL_conf
Structure	3-layer
Installation type	click
installation pattern	Plank pattern (1-plank)
Wood type	Oak
Sorting (grain)	lively/rustic
Underfloor heating	suitable
Wear layer	3,0 mm
Click system	Drop-Down
Manufacturer	SKAVA flooring
Look	Wood effect
Surface treatment	oiled
Range of application	Residential
Thickness in mm	14
Shipping group	L
Package Content	2,88 m²

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate check

The subfloor should be permanently dry, load-bearing and even.

ATTENTION: Never lay parquet over a soft subfloor, e.g. over carpet, cork or any type of foam underlay.

button

2. acclimatisation

The planks should be stored horizontally in the room where they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. subfloor preparation

Then clean the surface to be laid with a hoover. Any unevenness exceeding 3 mm per linear metre is sanded down and filled with a floor levelling compound.

Click:

button

4. before laying

Spread out the PE foil with an overlap of approx. 10 cm and tape it down.Now you can lay out the strips of impact sound insulation butt to butt against the laying direction of the floor covering and fix all overlaps with aluminium tape. The foil side should always face upwards.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

button

5. laying instructions

Lay the first plank well aligned on the subfloor, taking the edge distances into account. You can start laying the floor on the left side of the room. In the first row, the plank is clicked in with the front side. Use a rubber mallet to tap lightly on the front side so that the click connection snaps in well. In the next row, the planks are first clicked in with the long side and then the ends can be fixed by tapping lightly. To cut a plank, now take measurements and mark the plank. This is then cut with a jigsaw or crosscut saw.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall and between the flooring and all fixed components.

button

6. last row

Cut the planks of the last row to size and click them in place using a pull iron. Finally, the planks can be tapped down again with a hammer.

button

7. finish

The PU foil is now cut approx. 2 cm high and the skirting boards can be fitted. Here there is the click or glue variant.

Glue:

button

4 Before gluing

Lay out the first two rows of planks and make marks in the subfloor with a pencil. The planks can be cut to size using a crosscut saw.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

button

5. laying instructions

Now pick up the planks again and apply the adhesive up to the marking with a notched trowel. Align the first plank and place it in the wet bed. The second plank is clicked into the already lying plank with the front side. The boards of the next row are laid first with the long side, then with the short side. Then the adhesive for the next two rows can be applied and the planks can be glued.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall as well as to all fixed components.

button

6. last row

Finally, you can attach the skirting boards.

SKAVA Parquet - Oak Malmö | natural oiled (GT-NG-MAL_conf)

Product description

Technical data

DIY step by step

Helpful Videos

planeo parquet installation instructions

Glue down parquet - glue down parquet flooring on wooden subfloor

Floating installation parquet plank oak 1-plank UV-oiled

Discolouration of parquet - UV radiation and the effects

Parquet in the kitchen

Oiled parquet. Advantages and disadvantages

Varnished parquet. Advantages and disadvantages

Store parquet correctly - this is what you should consider before laying!

Laying herringbone parquet yourself is easy - herringbone floorboards to click on