Package price (120 m²): 2.754,00 €

Price 1 m²: 22,95 €

FREE

SAMPLE

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Gerflor Vinyl Flooring - Nerok 50 tex - Sherwood - Fog (NTex_2275)

0.50 mm wear layer - 42 industry (normal) - wood look - plank pattern - easy to install - low maintenance - environmentally friendly - no harmful softeners. Plasticiser

Item no.: NTex_2275

Sustainable GFT technology with patent.
Made from recycled plastic bottles.
Suitable for high loads in private and semi-commercial areas.
Robust wear layer of 0.5 mm for long-lasting use.
Excellent residual pressure behaviour.
High-quality surface finish with Pureclean technology.
Quick and easy installation, therefore ideal for renovations.
No adhesive required for installation of up to 35 m².
The GFT fibres compensate for slight unevenness in the subfloor.
Completely recyclable with 100% environmental friendliness.

Sustainable GFT technology with patent.
Made from recycled plastic bottles.
Suitable for high loads in private and semi-commercial areas.
Robust wear layer of 0.5 mm for long-lasting use.
Excellent residual pressure behaviour.
High-quality surface finish with Pureclean technology.
Quick and easy installation, therefore ideal for renovations.
No adhesive required for installation of up to 35 m².
The GFT fibres compensate for slight unevenness in the subfloor.
Completely recyclable with 100% environmental friendliness.

Offer request

Description

Technical data

Product description

Sustainable GFT technology with patent.
Made from recycled plastic bottles.
Suitable for high loads in private and semi-commercial areas.
Robust wear layer of 0.5 mm for long-lasting use.
Excellent residual pressure behaviour.
High-quality surface finish with Pureclean technology.
Quick and easy installation, therefore ideal for renovations.
No adhesive required for installation of up to 35 m².
The GFT fibres compensate for slight unevenness in the subfloor.
Completely recyclable with 100% environmental friendliness.

Discover Gerflor's stunning NEROK TEX vinyl sheeting, which is based on groundbreaking GFT technology and is sustainable.

These floors set the benchmark for environmental friendliness as their backing fibre matrix is made from recycled plastic bottles.

At the same time, Gerflor's NEROK TEX vinyl sheeting meets the highest demands in private and semi-commercial areas.

With a robust wear layer of 0.5 mm, NEROK TEX floors are extremely hard-wearing and offer excellent residual pressure behaviour. The high-quality Pureclean surface finish makes maintenance and cleaning much easier.

NEROK TEX vinyl sheet flooring is installed without the use of adhesives and is therefore ideal for renovations. The innovative GFT technology even compensates for slight unevenness in the subfloor and ensures an even appearance.

Best of all, these sheet goods are 100% recyclable, making them an environmentally friendly choice for your floor design.

Choose quality, sustainability and durability - choose NEROK TEX by Gerflor and transform your space into a place of timeless beauty and functionality.

Gerflor

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

item no.: NTex_2275

environmentally friendly
suitable for humid rooms
hard-wearing
100% recyclable
quick installation
easy cleaning & maintenance
non-slip
quiet

Technical data

item no.	NTex_2275
Installation type	glue
installation pattern	Plank pattern (1-plank)
Slip resistance	R9
Wear class	42 Industrial (moderate)
Wear layer	0,50 mm
Manufacturer	Gerflor
Piece per package	1
Collection	Nerok 50 tex
Collection variant	Sherwood
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
Look	Wood effect
Style	Classic
Special features	Textile back
Range of application	Residential, Commercial
Material	CV
Length in mm	30000
Thickness in mm	2.7
Warranty	15 Jahre Privat, 5 Jahre Gewerbe
Shipping group	M
Package Content	120 m²

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate check

The first step is to check the subfloor. Sand down any unevenness and fill it with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install PVC flooring over a soft subfloor, e.g. over carpet or any type of foam underlay.

button

2. before installation

PVC flooring should be stored in the room where it is to be installed for at least 24 hours before the installation. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

For loose laying of an area larger than 20 m², we recommend taping the edge of the walls.

Before laying, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

button

3. cutting to size

Tip: To achieve as uniform a floor appearance as possible, lay the strips in relation to each other so that the patterns match exactly and the strips overlap at the seam. Unpack the roll and roll it out on the subfloor. Use a hooked blade knife to roughly pre-cut the strips.

ATTENTION: There must always be a gap of approx. 3 cm between the flooring and the wall and between the flooring and all fixed components.

button

4. laying instructions

4.1 Loose laying

Stick the tape strips to all edge areas and remove the foil on the back of the tapes area by area. Now fix the floor by pressing lightly. Make a double cut at the joint of the strip. To do this, lay the sheet overlapping and cut the sheet to fit exactly along the joint. You can then make the final cut with an edge distance of approx. 2 mm. The floor should be free of tension when cutting and no objects should lie on the PVC floor.

4.2 Gluing

Apply the adhesive evenly to the subfloor in strips using a notched trowel. Please observe the flash-off times specified in the data sheet. Now lay the strips in the wet bed and rub down the PVC covering. Make the final cut with an edge distance of approx. 2 mm. Finally, the substrate can be rolled with a roller to avoid air bubbles.

button

5. finishing loose laying

First, tape over the joints of the strips with masking tape. The masking tape can then be cut at the joint and now the strips are welded together with a cold welding adhesive. After approx. 1 hour, the masking tape can be removed.

button

6. attaching the skirting boards

Finally, you can attach and seal the skirting boards. PVC flooring can also be attached to existing skirtings with a mounting adhesive.