planeo double roller blind 28mm TL head profile - Blue

• Simple mounting possible with clamps.
• Light incidence or privacy protection can be regulated.
• Attractive and semi-open head profile.
• Moisture resistant.
• Child safety clip included.
• Chain mechanism can be changed from right to left using a screwdriver.

Please note the order size and mounting instructions in the product description.

Clamp brackets are available separately!

To determine the appropriate order size of the planeo roller blind, please note the following information:

General roller blind dimensions:
Double roller blind: The specified width is the width of the cassette. The fabric is a total of 3 cm shorter than the upper frame. This prevents the fabric from rubbing against the upper frame and fraying. The operating chain is on the right side as standard, but can very easily be changed to the left side using a screwdriver.

Mounting in the window recess:
Hang the roller blind between the walls or in the frame (advantage: better insulation).

Determining size:
• Width: Measure the width of the frame at the top, in the middle and at the bottom. Order the smallest measurement minus 1 cm.
• Height: Measure the height of the frame on both the left and right sides. Order the highest measured height.

Mounting in front of the window recess:
Hang roller blind in front of the frame, on the wall or on a door (advantage: 1. window appears larger 2. less attractive window frames are concealed).

Determining size:
• Width: Measure the width, including the desired overlap. You can determine the desired overlap yourself. We recommend measuring 5 cm more per side. Let's say your window frame is 75 cm wide and you want 5 cm overlap on both sides. Then choose a product of 85 cm. Please note that the fabric of the product is sometimes narrower than the overall system.
• Height: Measure the height, including any overlap.