planeo roller blind 25mm VD Design - Nicole grey

• Simple mounting possible with clamps.
• Darkening solid fabric with light and heat protection.
• Moisture resistant.
• Child safety clip included.
• Chain mechanism interchangeable right or left.

Please note the order size and mounting instructions in the product description.

Clamp brackets are available separately!

To determine the appropriate order size of the planeo roller blind, please note the following information:

General roller blind dimensions:
Roller blind: The specified width is the length of the tube. For all roller blinds, the overall system is 3 cm wider. Assume that the width shown is 60 cm. This means that the tube length is 60 cm. The length of the total system, tube plus suspension, is then 63 cm. Please take this into account, especially if you want to hang the roller blind in the frame.

Mounting in the window recess:
Hang the roller blind between the walls or in the frame (advantage: better insulation).

Determining size:
• Width: Measure the width of the frame at the top, in the middle and at the bottom. Order the smallest measurement minus 1 cm.
• Height: Measure the height of the frame on both the left and right sides. Order the highest measured height.

Mounting in front of the window recess:
Hang roller blind in front of the frame, on the wall or on a door (advantage: 1. window appears larger 2. less attractive window frames are concealed).

Determining size:
• Width: Measure the width, including the desired overlap. You can determine the desired overlap yourself. We recommend measuring 5 cm more per side. Let's say your window frame is 75 cm wide and you want 5 cm overlap on both sides. Then choose a product of 85 cm. Please note that the fabric of the product is sometimes narrower than the overall system.
• Height: Measure the height, including any overlap.