MSRP 364,23 €

Package price (3,17 m²): 284,98 €

Price 1 m²: 89,90 €

FREE

SAMPLE

VAT included plus. 79,95 € shipping costs for deliveries to DE

L

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Skaben Wallboard - Factroy Matt - 260 x 122 cm

High-quality aluminium composite panel - waterproof & heat-resistant

Item no.: SWB-6206304

High-quality aluminium composite panels for indoor use.
High resistance to heat (fire) & water.
Extremely scratch-resistant surface thanks to special UV coating.
Also suitable for kitchen & bathroom (kitchen splashback/shower).

Please note that the aluminium composite panels are only suitable for walls!

Offer request

Description

Technical data

DIY - Videos

Product description

High-quality aluminium composite panels for indoor use.
High resistance to heat (fire) & water.
Extremely scratch-resistant surface thanks to special UV coating.
Also suitable for kitchen & bathroom (kitchen splashback/shower).

Please note that the aluminium composite panels are only suitable for walls!

Skaben wallboard panels are particularly suitable for use in kitchens and bathrooms due to their everyday properties. They can also be used in commercial areas such as restaurants, shopping centres, hotels or airports without any problems.

Scratch-resistant
Waterproof
Heat resistant
Easy to clean

To ensure a clean installation, the substrate should be clean, even and free of grease and dust. Please follow the video instructions to avoid installation errors.

Skaben

Skaben-Bodenbeläge für höchste Ansprüche:

Vinylboden von Skaben:
Authentische Holzoptik, Robustheit und Pflegeleichtigkeit zeichnen Skaben-Vinylböden aus. Die breite Auswahl an Designs ermöglicht es, den Boden perfekt an den eigenen Stil anzupassen.
Designboden von Skaben:
Innovation und individuelles Design treffen auf höchsten Gehkomfort. Skaben-Designboden bietet eine vielfältige Palette an Oberflächenstrukturen und Designs für eine einzigartige Raumgestaltung.
Laminat von Skaben:
Natürliche Holzoptik und höchste Qualität charakterisieren Skaben-Laminat. Strapazierfähig, langlebig und pflegeleicht, ist Skaben-Laminat die ideale Wahl für stilvolle Böden in Ihrem Zuhause.
Parkett von Skaben:
Die Eleganz von echtem Holz findet sich in den Parkettböden von Skaben. Mit verschiedenen Holzarten und Oberflächenstrukturen ermöglicht Skaben-Parkett eine klassische und zeitlose Raumgestaltung.

item no.: SWB-6206304

high quality
scratch-resistant
waterproof
heat resistant
easy to clean

Technical data

item no.	SWB-6206304
Manufacturer	Skaben
Collection	Wallboard
Length in mm	2600
Width in mm	1220
Thickness in mm	4
suitable for	Shower, Bath, Kitchen, Bedroom & living room, Hallway & Corridor
Installation type	glue
Look	Metal effect
Special features	Suitable for humid rooms, Seamless, XL Size
EAN	4062212203408
Piece per package	1
Material	Aluminium composite
Shipping group	L
Weight	19,75 kg / Packing
Colour	brown
Range of application	Residential
Package Content	3,17 m²

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

The substrate must be clean, even, dry and free of separating agents before installation. Plan and tape the surface on which the aluminium composite panels are to be glued in advance.

Before laying, it is imperative that you follow the official laying instructions that are included in every package, otherwise any claim to warranty and guarantee will be invalidated!

button

2. sealing the shower

If you want to install the aluminium composite panels in the shower area, the substrate should be sealed beforehand. First seal the bathtub waterproofing and then the wall surfaces. Apply the Mapegum to the thick surface of the bathtub area and carefully press the seal on with a spatula to prevent air infiltration. Next, apply the corner sealing tape. Here, too, the Mapegum should be applied nice and tight with a roller. The corners and wall junctions are also sealed. Finally, roll the surfaces with the Mapegum. After the first coat, the tape should be removed immediately, as it cannot be removed without leaving residue after the drying time. As soon as the coating is dry, tape the surface again nicely and apply the Mapegum a second time over the entire surface. Again, remove the tape immediately.

button

3. attaching the wall cladding

As soon as the course of the panels has been decided, cut the panels to size with a cross-cut saw and sand the newly created cut edges. Take measurements and drill holes for the water connections. Before gluing, hold the panel against the wall and check that the measurements are correct. Now apply the adhesive horizontally to the wall at a distance of approx. 15 cm. Now remove the protective film from the back of the board and press the board down with a spirit level. This allows you to check at the same time whether the boards are level. Now the end profiles can be cut to size and placed against the board. Tile levelling wedges can be used for a flush transition between the individual composite panels.

ATTENTION: Please keep a distance of at least 1-2 mm to the floor.

button

4. seal & grout

When all tiles are in place and the adhesive has cured, carefully tap the wedges with a hammer. Tape the panels back down and seal the gaps between the panel and the shower tray (or other objects) with silicone. Fill the gaps with silicone and neaten them. Finally, grout the panel joints with grout. Wash off the excess grout with clear water as soon as the compound has dried.

Skaben Wallboard - Factroy Matt - 260 x 122 cm

Product description

Skaben-Bodenbeläge für höchste Ansprüche:

Technical data

DIY step by step

Helpful Videos

Buy wood facing wall cladding - planeo Indo

Redesign walls in the living room with planeo wood facing

Antique wooden cladding planeo Indo

Wall subfloor test subfloor preparation for wall cladding

planeo wood facing - wall panelling - wall coverings - bathroom wall renovation

Bathroom redesign - renovate floor and walls in old bathroom with planeo

Wall cladding in concrete look

Self-adhesive wall cladding on chipboard